Scion Technology & Communications Limited
With the introduction of the PRO-0201L (Learning Universal Remote), we have added another two Infra-Red
codes to the range of Scion TV Distribution Systems. The new codes have been included in all products
purchased after 18/06/2009.
The handsets are being shipped with the code 1014 pre-programmed in to the “AUX” Mode.
Should you experience problems with the Scion “1014” code you can switch to “0327”.
You will then need to point the handset at the 1000/6000 and enter 072 to
enable the Scion unit to respond to the codes. See troubleshooting in the instructions.
There has been no change to the operation of PRO-0201 remotes and therefore will operate as before.
purchased after 18/06/2009.
The handsets are being shipped with the code 1014 pre-
Should you experience problems with the Scion “1014” code you can switch to “0327”.
You will then need to point the handset at the 1000/6000 and enter 072 to
enable the Scion unit to respond to the codes. See troubleshooting in the instructions.
There has been no change to the operation of PRO-
PRO-0201L operating Instructions
New IR Codes
Copyright Scion Technology & Communications Ltd
Tel: +44 (0) 118 9817 151
Fax: +44 (0) 118 9817 575
Mail: sales@sciontech.com
Note:
If using a third party remote, the IR codes relate to the following brand of product. These should be used
when entering direct codes.
Code 1014 = Medion Television
Code 0327 = Philips VCR
If using a third party remote, the IR codes relate to the following brand of product. These should be used
when entering direct codes.
Code 1014 = Medion Television
Code 0327 = Philips VCR